There are three screws next to the hearth. After they are all unscrewed, the cooktop can be removed, and then the screws on the stove head are unscrewed. There are also three screws. Some stoves are screwed inside, and some are screwed on the bottom. Turn the head over, and then you can see the fixed part of the ignition needle, just remove the fixed circlip of the ignition needle to remove the ignition needle. This is the installation method of the ignition needle, in fact, it is not difficult at all.

If the needle is a ceramic ignition needle for electronic ignition, it is usually broken. If it does not affect the normal ignition, then it is ok not to replace it. In fact, it actually only forms an electric spark between the coal hole, and the fragmentation may affect the life of the needle. It does not need to be replaced. The best way to replace the ignition needle of the gas stove is to ask the after-sales personnel of the manufacturer to visit the door. Just the best. If you buy an ignition needle from outside, the length and height of the ignition needle and the distance between the ignition needle and the fire cover after installation are not necessarily appropriate.





In fact, if you want to replace the ceramic ignition needle, I would persuade everyone here that it is best not to replace it yourself, because the gas stove is closely related to our personal safety. Therefore, when there is a problem with the ignition needle of the gas stove and needs to be replaced, it is best to contact the after-sales service personnel of the manufacturer.